A professional audio production enterprise integrating R&D, production, sales and service
Q210 is a two-way three-frequency linear array speaker. The cabinet is designed with 2 x 10 "low frequency driver, 1 8" intermediate frequency driver and 2.5"high frequency compression driver. The 2.5" voice coil is installed on the special waveform shaping equipment. Symmetrical dipole arrays around mid-coaxial mid-frequency and high-frequency Nd low-frequency drivers allow smooth overlap of adjacent frequencies in cross-design. This leads to a special 90 degree horizontal constant directional decentralized control, usually kept below 250 Hz. Mechanical and acoustic designs allow up to 24 speakers to fly in vertical arrays. The front of the speaker is protected by a rigid metal grille. Each side panel contains a handle, while two additional recessed handles are provided at the rear bottom of the cabinet. It is provided at the back bottom of the cabinet for easy handling and lifting.
System Type Three-Frequency Dual 10-inch Linear Speaker
Unit LF: 2 x 10"
MF: 1 x 8"
HF: 2x 2.25"
Frequency response 67Hz-18KHz (-5dB)
Power HF+MF:330W LF:600W
Nominal impedance 16_
Sensitivity HF+MF:112 dB LF:96 dB
Maximum sound pressure HF+MF:137 dB LF:124 dB
The coverage angle of 90 x0-10 depends on the bending degree of the array.
Connection mode HF+MF:+2-2 LF:+1-1
Size 310x700x460mm (HxWxD)